Components, Parts & Drivers
Sort by
Position
Name: A to Z
Name: Z to A
Price: Low to High
Price: High to Low
Created on
Display
8
12
25
50
100
per page
Shielded, sealed input transformers for Ampex AG-400, 500 and 600 series preamps. Cosmetic condition varies from Fair to Very Good. All tested for continuity.
A pair of 8 inch 2 way speakers, designed for Easy in wall installation.
A sealed 115/230 Volt power transformer for tube circuits. TF1A03YY, Part 5300436-001
A sealed 115/230 Volt power transformer for 6.3 Volt tube filament circuits.
A 107/117 Volt power transformer with 10Volt, 5 Amp center tapped secondary,
by Stancor (Standard Transformer Co.)
Audio input transformer, Mu-Metal Shielded case, Manufacturer Unknown.
From Bud Pressner's Gary IN studios.
See Photo #4 for windings and Ω information.
A potted transformer for preamp circuits, with Mu Metal shielding. Excellent condition. Sealed, with keyed octal plug.
An HP 9100-1913 Power Transformer, 66B-86MS TF4RX01YY. NOS.
A pair of 10 inch coaxial drivers, removed from Akai model SS-1210 cabinets. VG condition, tested, working, priced per pair.
JBL model 5195 plug in transformer, used, fair condition.
An antique pulled from a tube radio set, with B+ and -C terminals.
A small signal output transformer removed from equipment, in Good condition.
A power transformer with 1 secondary tap, removed from equipment, in Good condition.
A lot of 15 unboxed, Victoreen GV4S-3300 Corotron tubes. Price is for the lot.
A used tube output transformer, in good condition.
Original Panasonic 2SD837Q in TO220 case.
Factory 100 count package.
Custom built copies of Eastman Sound Martin Speakers "Little Monsters." Priced per Pair.
Custom built copies of Eastman Sound Martin Speakers "Little Monsters." Priced EACH.
Custom built copies of Eastman Sound Martin Speakers "Little Monsters." Priced per Pair.
Shielded, sealed input transformes for High Impedance, tube type Mic preamp circuits. Cosmetic condition varies from poor to good. All tested for continuity.
A potted tube output transformer for Push-Pull tube circuits. Good condition.
Unwired Switchcraft SF3M barrels; Male to Female 3 pin XLR. Multiple audio and video applications. NOS.
Tech Lab (Daven) 45 db Precision Attenuators {30 steps of 1.5db}. Removed from a console, all in good condition.
A potted input transformer for preamp circuits. Good condition.
A potted transformer for preamp circuits. Good condition.
A USED UTC H-94 with 120 Volt primary. Fair condition.
A potted input transformer for Mic preamp circuits. Fair condition.
A potted input transformer for Mic preamp circuits. Good condition.
A boxed, NOS Victoreen GV3A-1300R Corotron tube.
A boxed, NOS Victoreen GV3A-450R Corotron tube.
A boxed, NOS Victoreen GV3A-550R Corotron tube.
A boxed, NOS Victoreen GV3B-450 Corotron tube. Identical in appearance as the GV3B-450R.
A boxed, NOS Victoreen GV3B-450R Corotron tube.
A boxed, NOS Victoreen GV3B-550 Corotron tube.
A boxed, NOS Victoreen GV4S-1600A Corotron tube.
A boxed, NOS Victoreen GV4S-2200 Corotron tube.
A boxed, NOS Victoreen GV4S-3300 Corotron tube.
A boxed, NOS Victoreen GV4S-3500 Corotron tube.
A boxed, NOS Victoreen GV4S-900 Corotron tube.
A single Wharfedale 12" woofer, in excellent condition.
A single Wharfedale 12" woofer, in excellent condition. With Red Alnico magnet.
A single Wharfedale 4" mid, in Good condition.
Part # 4322 020 60241 B6U.
Ampex 350 1/4" Full Track head assembly, removed from an Early Model 350 deck. Fair condition, see notes.
These have been removed from an Ampex 350 1/4" Deck plate. They have studs for mounting to the deck. Good condition, see notes.
These boards plug into the Playback amplifiers in the electronics package of Ampex AG440 and AG445 recorders.
Ampex Assembly Number: 4020270-01
Ampex AG440B 1/2" 4 Track head assembly, looks new and marked as such, sn 402027305 trapezoidal lap on record head.
A pair of ACI crossovers for their 3 way G2R cabinets. Still in the original shrink wrap.
Price is for the Pair.
Celestion 12" guitar speaker, older version, fair condition, with some defects to the cone. Tested in a ported cabinet. Please see description.
Woofer, Tweeter, Crossover and baffle for an EV Sentry I Broadcast monitor. No cabinet is included.
Electro Voice EVM12L Pro driver, This is the original version that has been replaced by the "classic" and Zakk Wylde Black Label versions. Hard to find.
*Please note the price is for a single speaker.*